Chances are that even if you are going to fly an old aircraft then you will still be carrying at least one type of GPS-enabled device with you everywhere you go. Sometimes if you are not caring anything additional then that device can even be your smartphone that has a GPS tracking system and you are taking it with you everywhere you go along with you.
Sometimes you can be in a problem if the GPS tracking system has failed and your smartphone or iPhone is not working anymore. In this situation, you will not be able to track your destination and it can be a huge problem for you for evaluating your private pilot check ride. It will also cause problems for you because you will not be able to find your next point by looking out of the window.
In this article, we will discuss how to create a VFR navigation log in foreflight. So, without any further wait keep on reading below to find out all the information about it so check it out!
1. Determine The Straight Line
Foreflight has a default feature and it automatically downloads all the forecast data to your plan and strategy. This is done to create a proposed magnetic heading that you can fly. First of all, you have to create your route and then you will tap the departure box and then you can change the date 230 days from right now. Then you can click on the nav log tab and see the CRS.
2. Identification And Marking Of The Visual Checkpoints
In this tab, your first visual checkpoint will be estimated and located after the point at which you are expecting to level your altitude. You can use the performance table to find out the time and also estimate the distance. There are many ways to drop a pin on the map and you can mark this checkpoint on the plan easily. You can hold your finger over the magenta line.
3. Update Your Departure Time
The third step is very important because in this step you have to update your departure time. You can do this to obtain a suggested course heading according to the wind correction that has been applied. For doing this you will have to open the departure box and then you can click on the now option.
If you are connected to the internet then you will be able to see the updated flight information instantly otherwise you will not be able to see it. You should also keep in your mind that the estimated time and fuel will be based on the data that you have entered in the aircraft performance profile.
But this application is also going to provide you with all the basic data and that is why you will have to keep checking this information from time to time to make sure that it is up to date according to the performance of your aircraft.
